Sedimentation & Classification Equipments

We provide our clients with quality clarifiers that are used in various industries for the process of clarification. Known for their efficiency, our clarifiers are available in various dimensions as per the requirement of our clients. Further, these clarifiers are easy to install and requires low maintenance. The size of settling basins of these clarifiers depends on the following parameters:

• Over flow rate (surface settling rate)
• tank depth at the sidewall
• Detention time

Process:

Clarification process is done in rectangular or circular basins, where the wastewater is held to allow particulate solids to settle out of the suspension.

We are offering our clients with a quality range of Lamella Separators that are used to clarify dirty water. The clarification surface and dimensions of lamella separator can be reduced as per the requirement. Further, these lamella separators are appreciated by our clients for its efficiency and long serviceability.

Function specification:

The dirty water gets into the inlet channel and runs downwards. In the middle of the separator the flow is reversed and streams up through the lamellas, passes a weir and gets out of the separator. During the passage the particles settle down onto the inclined lamellas (sedimentation) and slide into the sludge funnel. For separating finest particles (turbidity) from the water, it is necessary to use flocculants.

We manufacture and supply a wide range of industrial thickeners that are used for classification and sedimentation of liquids. Available in various types and sizes, these thickeners are available with special arms for dense slurries. Moreover, we can customize these industrial thickeners as per the specifications provided by our clients.

Features:

• High performance
• Easy installation
• Low maintenance

We are also proud to state that we are one of the few leading firms to offer premium quality clarifiers that are widely used in mining and sand washing, STP (sweage treatment plant, ETP (effeluent treatment plant) minning and de-gritting purpose. Featured with long working life and high performance level this systems are actually the true gem of innovative technology. They can be easily installed and require less maintenance.

We manufacture and supply a wide range of Screw Conveyors that are known as material handling mechanism and are used horizontally or at a slight incline as an efficient way to move semi-solid material. These conveyors are available with a trough containing either a spiral coiled around a shaft, driven at one end and held at the other, or a Shaft less Spiral, driven at one end and free at the other. Further, we provide complete turnkey solutions on our range of screw conveyors right from layout designing to its installation.

Features:

• High performance
• Easy to operate

We at Indofab Industries, also offer a complete line of heavy-duty screw and rake classifiers that can be specified with either a single or twin model screw classifier. These classifiers are widely used to separate water and silt and other unwanted fines from sand while dewatering. Available in a wide range of sizes to cover nearly all requirements and specifications, they operate at a slow speed to separate sand and unwanted clay and debris is floated over the adjustable weirs. Our desiegned classifiers are provided with a hydro cyclone grit separator(s) to meet larger flow requirements. Using hydraulic forces (no moving parts), the hydro cyclone separator concentrates the grit and reduces the amount of water that is delivered to the classifier.

We provide our clients with Hydro cyclones that are available with quality mixing tank (turbo washer). These hydro cyclones are available in various models and can be manufactured as per the requirement of our clients. Moreover, these hydro cyclones are appreciated by our clients for its durability, efficiency and low maintenance.

Functioning:

This unit works with a pressure force of a feeding pump and reaches a higher separation effect (approximately 20 times earth's gravity) by using the rotational forces of the moving water. The PE/PP material is leaving the Hydro cyclone at the upper end with the mainstream of the water, sinking material, PET, at the lower end with only small amounts of water. By choosing the nozzle sizes at the outlets of the cyclone the selectivity can be adjusted.

Cyclone Seperators: Designed in accordance to international standards, we are one of the few leading names to offer cyclone seperators that are used to remove 99% of free liquids and solids 5 microns and larger. They are also used as slug catchers and inlet separators for plants or for gas well test separators. These are devices that utilize centrifugal forces and low pressure caused by spinning motion to separate materials of differing density, size, and shape. These separators are particularly effective for the removal of solids, such as phaltines and iron sulphides. The liquid holding area can also be enlarged to handle large volumes of liquids and/or slugs.

Cyclone Collectors: These are large funnel shaped sheet metal tubes connected to ducts often used in woodshops, machine shops, manufacturing plants, and powder processing plants. These cyclone collectors are designed to achieve high dust collection efficiencies at low pressure drops. They separate dust from the dusty air stream by using a settling chamber (a large box) in ductwork carrying dusty air. When the dust filled air stream enters the large settling chamber its speed come down considerably owing to the sudden increase in size of its passage.